Installation of mosaic tiles is very easy. All you need are some tools which are available in almost all hardware stores. Installation procedure of stone and glass mosaic tiles or any other type of mosaic tiles is same. Below is a step by step instruction on how to install a mosaic tile.
We suggest to adopt professional adhesives and joint filler.
Use special ash knife to sweep 2 mm to 3 mm thickness adhesive after cleaning to pavement surfaces.
Use dentation trowel carve to score out waviness on the flat mushy adhesive.
When paving mosaic pay attention to align the joints between the product network.
Tenderly pat the surface of the mosaic and levelling treatment to make sure it is adhesive evenly.
About 20 hours later when mosaic is totally dry, use the special sponge knife to fill the joint fillers in the gaps (Soft tool to prevent damaging product surface).
After 30 minutes, when the joint filler is semi-dry, use wet high density sponge to fill into the joints about 1-2 mm which can better show the highlight effect of the product.
Use dry towel to clean the and finish the mosaic tile installation.
As being a mosaic tiles manufacturer, we care for our customers. Hope above instructions were easy to follow. In the beginning you might experience a bit of problem but in the end you will not regret when having the desired results!










